Bachelor of Technology: Trades and Technology Leadership
Any apprenticeship graduate with a journeyman's ticket and a minimum of 4 years experience related to their trade will be eligible to apply up to 60 credits towards the Bachelor of Technology in Trades and Technology Leadership degree program at Thompson Rivers University. Updated April 30, 2008 FORMAL AGREEMENT.
Bachelor of Business Administration: Trades Management
Apprentice graduates with at least 5 years work experience and a Provincial Certificate of Qualification or inter-provincial certificate of qualification, held for at least one year, are eligible to apply for this business oriented Bachelor of Business Administration in Trades Management degree at University of Fraser Valley. Updated April 23, 2010 SPECIFIC RECOGNITION.
Upon successful completion of the program you may be eligible to register as an apprentice in the Welder Apprenticeship program, once you find employment. Welding Technician graduates will also be able to challenge the first and second period Welder apprenticeship exams. Updated July 21, 2011 INTERNAL OPTION.
A two-year diploma from a recognized Canadian college, technical institute or equivalent, or successful completion of two years at a recognized post-secondary academic institute. Updated April 30, 2008 INTERNAL OPTION.
SAIT Polytechnic
Technology Infrastructure Management
Recent and past graduates of any SAIT two-year diplomas are eligible for admission to the Fast-Track Technology Infrastructure Management program. See Program Coordinator for future details. INTERNAL OPTION
Graduates of 2-year diplomas will be awarded up to 5 full junior open options. Students transferring from other institutions into programs at the University of Calgary must make themselves aware of the appropriate required (prerequisite) preparation for course they wish to take. This may be done by consulting the Courses of Instruction section of this Calendar. Students receiving specified transfer credit status for particular courses should be aware that this does not necessarily imply that exact course equivalence is being awarded, but that this may indicate an equivalent level of experience in a subject area. Updated December 8, 2010 ACAT FORMAL AGREEMENT 89900.
Students from Global Studies at Rocky Mountain College are eligible to enroll in SAIT Fast Track Information Technology, Pre-employment and Continuing Education programs as part of their diploma program at Rocky Mountain College provided space is available at SAIT and all admission requirements are met. Updated March 24, 2011 FORMAL AGREEMENT
A two-year diploma from a recognized Canadian college, technical institute or equivalent, or successful completion of two years at a recognized post-secondary academic institute. Updated April 30, 2008.
SAIT Polytechnic
Technology Infrastructure Management
Recent and past graduates of any SAIT two-year diplomas are eligible for admission to the Technology Infrastructure Management Fast-Track program. See Program Coordinator for further details. Updated February 1, 2011 INTERNAL OPTION.
Entrance requirements into BCIT’s Bachelor of Technology in Manufacturing are a two-year post-secondary diploma of technology in a manufacturing-related technology along with at least six months of appropriate work experience, English 12 or equivalent or English-language proficiency, and an interview. Updated July 4, 2007 GENERAL POLICY.
Entrance requirement into BCIT’s Bachelor of Technology in Technology Management states that a two-year post-secondary diploma of technology is the main requirement, therefore graduates of this SAIT diploma are eligible to apply along with English 12 or equivalent or English-language proficiency, two years of relevant work experience subject to departmental approval, and a personal interview with Program Head. Alternate delivery methods are available. Updated July 4, 2007 GENERAL POLICY.
Computer Engineering Summer Bridge to University of Victoria
Automated Systems Engineering Technology graduates are eligible to apply for the Summer Intake Computer Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of Victoria, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of computer engineering at the University of Victoria campus. UpdatedApril 23, 2010 SPECIFIC RECOGNITION.
Electrical Engineering Summer Bridge to University of Victoria
Automated Systems Engineering Technology graduates are eligible to apply for the Summer Intake Electrical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of Victoria, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Electrical Engineering at the University of Victoria campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Manufacturing (BET) (all courses available by distance) must have completed this SAIT Automated Systems Engineering Technology diploma. Transfer students need to complete a minimum of 30 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Petroleum (BET) must have completed this SAIT Automated Systems Engineering Technology diploma. Transfer students need to complete a minimum of 36 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
The Bachelor of Technology degree bridges the gap between technologists and engineers. Specializations are currently offered in Resources and Environmental Management, Applied Building Science, Electrical and Electronics Engineering Technology, and Mechanical and Manufacturing Technology, as well as a General Studies option. Open to graduates of an accredited or recognized Applied Science or Engineering Technology program with a minimum GPA of 2.3. Updated April 30, 2008 GENERAL POLICY.
Bachelor of Technology: Trades and Technology Leadership
Graduates of any two year technology program, who also have a minimum of 4 years experience related to their program of study, will be eligible to apply up to 60 credits towards the Bachelor of Technology in Trades and Technology Leadership degree program at Thompson Rivers University. Updated April 30, 2008 FORMAL AGREEMENT.
This Bachelor of Applied Management (BAM) degree program is extremely flexible and suited to two year diploma graduates wanting to receive their degree in two years (4 one-term semesters). Admission requirements for this degree include successful completion of any two year program with an overall average of 70%. The two years of study at UNB would be specifically designed to build upon their studies and focus acquired through their college program. This program would be of interest to those college graduates who would like to progress their career in management. Updated November 7, 2007 FORMAL AGREEMENT.
Upon successful completion of the appropriate six month Summer Computer Engineering Bridge Program offered at Camosun College, students with a two year diploma in Automated Systems Engineering Technology will be admitted to the third year of the Bachelor of Engineering in Computer Engineering (January) program. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010 SPECIFIC RECOGNITION.
Upon successful completion of the appropriate six month Summer Engineering Bridge Program offered at Camosun College, students with a two year diploma in ASNT will be admitted to the third year of the Bachelor of Engineering in Electrical Engineering (January) program. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010SPECIFIC RECOGNITION.
Transfer options may also be available at other post-secondary institutions where credits from SAIT programs could be evaluated on an individual basis. Interested students should contact the post-secondary institute of their choice for more information and possible options there.
Transfer options may be available at other post-secondary institutions where credits from SAIT programs could be evaluated on an individual basis. Interested students should contact the post-secondary institute of their choice for more information and possible options there.
A two-year diploma from a recognized Canadian college, technical institute or equivalent, or successful completion of two years at a recognized post-secondary academic institute. Updated April 30, 2008.
SAIT Polytechnic
Technology Infrastructure Management
Recent and past graduates of any SAIT two-year diplomas are eligible for admission to the Fast-Track Technology Infrastructure Management program. See Program Coordinator for further details. Updated February 1, 2011. INTERNAL OPTION
The four-year Bachelor of Science (Post Diploma) is offered by Athabasca University's Centre for Science. Students must have successfully completed an approved science-related technician or technology diploma from a college or institution of technology, or have provincial designation as a technician or technologist, before they enroll in the Bachelor of Science (Post Diploma). The BScPD is designed to allow students to continue studies towards a science degree from either the technician or technologist level. Students complete the program regulations in effect at the time of their enrolment. SAIT students are granted 30 credits towards this degree. Updated August 28, 2009ACAT FORMAL AGREEMENT 89478.
Any student with technical qualifications from outside BCIT can only be considered for direct entry into the Design option of BCIT's Mechanical Engineering Technology program which is at level 3 (second year) of the Bachelor of Engineering (Mechanical) program. Acceptance from there into level 5 (third year) of the B. Eng. program requires the completion of the Design option with a minimum GPA of 70% in the second year and successful completion of two higher-level math course which are offered in term 4 in addition to the term 4 curriculum of the Design option. Updated April 30, 2008 GENERAL POLICY.
Entrance requirements into BCIT’s Bachelor of Technology in Manufacturing are a two-year post-secondary diploma of technology in a manufacturing-related technology along with at least six months of appropriate work experience, English 12 or equivalent or English-language proficiency, and an interview. Updated July 4, 2007 GENERAL POLICY.
Entrance requirement into BCIT’s Bachelor of Technology in Technology Management states that a two-year post-secondary diploma of technology is the main requirement, therefore graduates of this SAIT diploma are eligible to apply along with English 12 or equivalent or English-language proficiency, two years of relevant work experience subject to departmental approval, and a personal interview with Program Head. Alternate delivery methods are available. Updated July 4, 2007 GENERAL POLICY.
Mechanical Engineering Summer Bridge to University of Victoria
Mechanical Design Technology graduates are eligible to apply for the Summer Intake Mechanical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of Victoria, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the University of Victoria campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Mechanical Engineering Summer Bridge to University of British Columbia - Okanagan
Mechanical Design Technology graduates are eligible to apply for the Summer Intake Mechanical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of British Columbia, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the UBC-Okanagan campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Mechanical Engineering Winter Bridge to University of British Columbia - Vancouver or Okanagan
Mechanical Design Technology graduates are eligible to apply for the Winter Intake Mechanical Engineering Bridge program (January to June) offered by Camosun with the full support and co-operation of the University of British Columbia, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the UBC-Okanagan and UBC-Vancouver campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Manufacturing (BET) (all courses available by distance) must have completed this SAIT Mechanical Design Technology diploma. Transfer students need to complete a minimum of 30 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Petroleum (BET) must have completed this SAIT Mechanical Design Technology diploma. Transfer students need to complete a minimum of 36 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
The Bachelor of Technology degree bridges the gap between technologists and engineers. Specializations are currently offered in Resources and Environmental Management, Applied Building Science, Electrical and Electronics Engineering Technology, and Mechanical and Manufacturing Technology, as well as a General Studies option. Open to graduates of an accredited or recognized Applied Science or Engineering Technology program with a minimum GPA of 2.3. Updated April 30, 2008 GENERAL POLICY.
Bachelor of Technology: Trades and Technology Leadership
Graduates of any two year technology program, who also have a minimum of 4 years experience related to their program of study, will be eligible to apply up to 60 credits towards the Bachelor of Technology in Trades and Technology Leadership degree program at Thompson Rivers University. Updated April 30, 2008 FORMAL AGREEMENT.
Bachelor of Applied Science in Mechanical Engineering
Upon successful completion of the appropriate six month Summer or Winter Mechanical Engineering Bridge Program offered at Camosun College, students with a two year diploma in Mechanical Design Technology will have access to the third year of the University of British Columbia Mechanical Engineering program at either Vancouver (September) or Okanagan (January or September) campus. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010SPECIFIC RECOGNITION.
This Bachelor of Applied Management (BAM) degree program is extremely flexible and suited to two year diploma graduates wanting to receive their degree in two years (4 one term semesters). Admission requirements for this degree include successful completion of any two year program with an overall average of 70%. The two years of study at UNB would be specifically designed to build upon their studies and focus acquired through their college program. This program would be of interest to those college graduates who would like to progress their career in management. Updated November 7, 2007 FORMAL AGREEMENT.
Upon successful completion of the appropriate six month Summer Engineering Bridge Program offered at Camosun College, students with a two year diploma in Mechanical Design Technology will be admitted to the third year of the Bachelor of Engineering in Mechanical Engineering (January) program. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010 SPECIFIC RECOGNITION.
Transfer options may also be available at other post-secondary institutions where credits from SAIT programs could be evaluated on an individual basis. Interested students should contact the post-secondary institute of their choice for more information and possible options there.
A two-year diploma from a recognized Canadian college, technical institute or equivalent, or successful completion of two years at a recognized post-secondary academic institute. Updated April 30, 2008.
A two-year SAIT diploma in Petroleum Engineering Technology, Chemical Engineering Technology, Mechanical Engineering Technology, Instrumentation Engineering Technology, Civil Engineering Technology, Electrical Engineering Technology, Power Engineering Technology, or similar engineering technology, with a grade point average of 2.5 or better is the normal entrance requirements. Updated October 31, 2008 INTERNAL OPTION.
SAIT Polytechnic
Technology Infrastructure Management
Recent and past graduates of any SAIT two-year diplomas are eligible for admission to the Technology Infrastructure Management Fast-Track program. See Program Coordinator for further details. Updated February 1, 2011.
The four-year Bachelor of Science (Post Diploma) is offered by Athabasca University's Centre for Science. Students must have successfully completed an approved science-related technician or technology diploma from a college or institution of technology, or have provincial designation as a technician or technologist, before they enroll in the Bachelor of Science (Post Diploma). The BSc(PD) is designed to allow students to continue studies towards a science degree from either the technician or technologist level. Students complete the program regulations in effect at the time of their enrolment. SAIT students are granted 60 credits at the technologist level. Updated April 30, 2008 ACAT FORMAL AGREEMENT 89514.
Any student with technical qualifications from outside BCIT can only be considered for direct entry into the Design option of BCIT's Mechanical Engineering Technology program which is at level 3 (second year) of the Bachelor of Engineering (Mechanical) program. Acceptance from there into level 5 (third year) of the B. Eng. program requires the completion of the Design option with a minimum GPA of 70% in the second year and successful completion of two higher-level math course which are offered in term 4 in addition to the term 4 curriculum of the Design option. Updated April 30, 2008 GENERAL POLICY.
Entrance requirements into BCIT’s Bachelor of Technology in Manufacturing are a two-year post-secondary diploma of technology in a manufacturing-related technology along with at least six months of appropriate work experience, English 12 or equivalent or English-language proficiency, and an interview. Updated July 4, 2007 GENERAL POLICY.
Entrance requirement into BCIT’s Bachelor of Technology in Technology Management states that a two-year post-secondary diploma of technology is the main requirement, therefore graduates of this SAIT diploma are eligible to apply along with English 12 or equivalent or English-language proficiency, two years of relevant work experience subject to departmental approval, and a personal interview with Program Head. Alternate delivery methods are available. Updated July 4, 2007 GENERAL POLICY
Mechanical Engineering Summer Bridge to University of Victoria
Mechanical Engineering Technology graduates are eligible to apply for the Summer Intake Mechanical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of Victoria, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the University of Victoria campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Mechanical Engineering Summer Bridge to University of British Columbia - Okanagan
Mechanical Engineering Technology graduates are eligible to apply for the Summer Intake Mechanical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of British Columbia, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the UBC-Okanagan campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Mechanical Engineering Winter Bridge to University of British Columbia - Vancouver or Okanagan
Mechanical Engineering Technology graduates are eligible to apply for the Winter Intake Mechanical Engineering Bridge program (January to June) offered by Camosun with the full support and co-operation of the University of British Columbia, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the UBC-Okanagan and UBC-Vancouver campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Manufacturing (BET) (all courses available by distance) must have completed this SAIT Mechanical Engineering Technology diploma. Transfer students need to complete a minimum of 30 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Petroleum (BET) must have completed this SAIT Mechanical Engineering Technology diploma. Transfer students need to complete a minimum of 36 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
The Faculty of Engineering at Lakehead University offers post-diploma programs which enable qualified engineering technology graduates from accredited Canadian technology programs to obtain engineering degrees. The post-diploma programs consist of two years of full-time study preceded by four transition courses taken during July and August. Click on Admissions for additional information. Updated April 23, 2010 GENERAL POLICY.
The Faculty of Engineering and Applied Science at Memorial University has bridging programs that allow certain diploma graduates to enter the Engineering program with advanced standing. In each case, the bridging program consists of two academic terms: Fall and Winter semesters, followed by entry into Academic Term 4 of the appropriate discipline. Information about this opportunity may be found in the University Calendar or at Undergraduate StudiesUpdated August 13, 2007 SPECIFIC RECOGNITION.
Memorial University offers a Bachelor of Technology program, administered by the Marine Institute, with admission available to graduates of nationally accredited applied science/engineering technology and health science technology diploma programs. Graduates of the Mechanical Engineering Technology diploma program may satisfy the requirements for the degree by successfully completing thirteen courses (39 credit hours) offered by a number of the University's faculties and schools, including a technical project and report. The degree is offered through distance delivery, with all the required courses, together with a number of elective choices, delivered using Internet-based technology. Updated August 28, 2009 FORMAL AGREEMENT.
Mechanical Engineering Technology graduates who have a GPA of 3.0 or higher are eligible to apply to Montana Tech’s Bachelor of Science in General Engineering and receive a full line of 64 pre-determined transfer credits for the General Engineering, Mechanical Option. Students will still take 2½ yrs to complete the program due to pre-requisites and the timing of courses. For more information, contact International Enrollment Services at 1-406-486-4568. Updated July 21, 2011. SPECIFIC RECOGNITION.
The Bachelor of Technology degree bridges the gap between technologists and engineers. Specializations are currently offered in Resources and Environmental Management, Applied Building Science, Electrical and Electronics Engineering Technology, and Mechanical and Manufacturing Technology, as well as a General Studies option. Open to graduates of an accredited or recognized Applied Science or Engineering Technology program with a minimum GPA of 2.3. Updated April 30, 2008 GENERAL POLICY.
Bachelor of Technology: Trades and Technology Leadership
Graduates of any two year technology program, who also have a minimum of 4 years experience related to their program of study, will be eligible to apply up to 60 credits towards the Bachelor of Technology in Trades and Technology Leadership degree program at Thompson Rivers University. Updated April 30, 2008 FORMAL AGREEMENT.
Bachelor of Applied Science in Mechanical Engineering
Upon successful completion of the appropriate six month Summer or Winter Mechanical Engineering Bridge Program offered at Camosun College, students with a two year diploma in Mechanical Engineering Technology will have access to the third year of the University of British Columbia Mechanical Engineering program at either Vancouver (September) or Okanagan (January or September) campus. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010 SPECIFIC RECOGNITION.
This Bachelor of Applied Management (BAM) degree program is extremely flexible and suited to two year diploma graduates wanting to receive their degree in two years (4 one-term semesters). Admission requirements for this degree include successful completion of any two year program with an overall average of 70%. The two years of study at UNB would be specifically designed to build upon their studies and focus acquired through their college program. This program would be of interest to those college graduates who would like to progress their career in management. Updated November 7, 2007 FORMAL AGREEMENT.
Upon successful completion of the appropriate six month Summer Engineering Bridge Program offered at Camosun College, students with a two year diploma in Mechanical Engineering Technology will be admitted to the third year of the Bachelor of Engineering in Mechanical Engineering (January) program. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010 SPECIFIC RECOGNITION.
Transfer options may also be available at other post-secondary institutions where credits from SAIT programs could be evaluated on an individual basis. Interested students should contact the post-secondary institute of their choice for more information and possible options there.
Transfer options may be available at other post-secondary institutions where credits from SAIT programs could be evaluated on an individual basis. Interested students should contact the post-secondary institute of their choice for more information and possible options there.
A two-year diploma from a recognized Canadian college, technical institute or equivalent, or successful completion of two years at a recognized post-secondary academic institute. Updated April 30, 2008.
SAIT Polytechnic
Technology Infrastructure Management
Recent and past graduates of any SAIT two-year diplomas are eligible for admission to the Technology Infrastructure Management (Fast-Track) program. See Program Coordinator for further details. Updated February 1, 2011.
The four-year Bachelor of Science (Post Diploma) is offered by Athabasca University's Centre for Science. Students must have successfully completed an approved science-related technician or technology diploma from a college or institution of technology, or have provincial designation as a technician or technologist, before they enroll in the Bachelor of Science (Post Diploma). The BSc(PD) is designed to allow students to continue studies towards a science degree from either the technician or technologist level. Students complete the program regulations in effect at the time of their enrolment. SAIT students are granted 60 credits at the technologist level. Updated April 30, 2008 ACAT FORMAL AGREEMENT 89514.
Entrance requirements into BCIT's Bachelor of Technology in Manufacturing are a two-year post-secondary diploma of technology in a manufacturing-related technology along with at least six months of appropriate work experience, English 12 or equivalent or English-language proficiency, and an interview. Updated July 4, 2007 GENERAL POLICY.
Entrance requirement into BCIT’s Bachelor of Technology in Technology Management states that a two-year post-secondary diploma of technology is the main requirement, therefore graduates of this SAIT diploma are eligible to apply along with English 12 or equivalent or English-language proficiency, two years of relevant work experience subject to departmental approval, and a personal interview with Program Head. Alternate delivery methods are available. Updated July 4, 2007 GENERAL POLICY.
Mechanical Engineering Summer Bridge to University of Victoria
Welding Engineering Technology graduates are eligible to apply for the Summer Intake Mechanical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of Victoria, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the University of Victoria campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Mechanical Engineering Summer Bridge to University of British Columbia - Okanagan
Welding Engineering Technology graduates are eligible to apply for the Summer Intake Mechanical Engineering Bridge program (Late June to December) offered by Camosun with the full support and co-operation of the University of British Columbia, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the UBC-Okanagan campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Mechanical Engineering Winter Bridge to University of British Columbia - Vancouver or Okanagan
Welding Engineering Technology graduates are eligible to apply for the Winter Intake Mechanical Engineering Bridge program (January to June) offered by Camosun with the full support and co-operation of the University of British Columbia, provided all admission requirements are met. Successful completion of this bridging program will provide access to the third year of Mechanical Engineering at the UBC-Okanagan and UBC-Vancouver campus. Updated April 23, 2010 SPECIFIC RECOGNITION.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Manufacturing (BET) (all courses available by distance) must have completed this SAIT Welding Engineering Technology diploma. Transfer students need to complete a minimum of 30 credits at CBU for the completion of this degree. Please note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
Individuals seeking admission to CBU's Bachelor of Engineering Technology - Petroleum (BET) must have completed this SAIT Welding Engineering Technology diploma. Transfer students need to complete a minimum of 36 credits at CBU for the completion of this degree. Please Note: If you have transfer credit from another institution towards your SAIT diploma, you must have this transfer credit assessed by CBU. Updated March 30, 2009 FORMAL AGREEMENT.
Memorial University offers a Bachelor of Technology program, administered by the Marine Institute, with admission available to graduates of nationally accredited applied science/engineering technology and health science technology diploma programs. Graduates of the Welding Engineering Technology diploma program may satisfy the requirements for the degree by successfully completing thirteen courses (39 credit hours) offered by a number of the University's faculties and schools, including a technical project and report. The degree is offered through distance delivery, with all the required courses, together with a number of elective choices, delivered using Internet-based technology. Updated August 28, 2009 FORMAL AGREEMENT.
The Bachelor of Technology degree bridges the gap between technologists and engineers. Specializations are currently offered in Resources and Environmental Management, Applied Building Science, Electrical and Electronics Engineering Technology, and Mechanical and Manufacturing Technology, as well as a General Studies option. Open to graduates of an accredited or recognized Applied Science or Engineering Technology program with a minimum GPA of 2.3. Updated April 30, 2008 GENERAL POLICY.
Bachelor of Technology: Trades and Technology Leadership
Graduates of any two year technology program, who also have a minimum of 4 years experience related to their program of study, will be eligible to apply up to 60 credits towards the Bachelor of Technology in Trades and Technology Leadership degree program at Thompson Rivers University. Updated April 30, 2008 FORMAL AGREEMENT.
Bachelor of Applied Science in Mechanical Engineering
Upon successful completion of the appropriate six month Mechanical Engineering Bridge Program offered at Camosun College, students with a two year diploma in Welding Engineering Technology will have access to the third year of the University of British Columbia Mechanical Engineering program at either Vancouver (September) or Okanagan (January or September) campus. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010 SPECIFIC RECOGNITION.
This Bachelor of Applied Management (BAM) degree program is extremely flexible and suited to two year diploma graduates wanting to receive their degree in two years (4 one-term semesters). Admission requirements for this degree include successful completion of any two year program with an overall average of 70%. The two years of study at UNB would be specifically designed to build upon their studies and focus acquired through their college program. This program would be of interest to those college graduates who would like to progress their career in management. Updated November 7, 2007 FORMAL AGREEMENT.
Upon successful completion of the appropriate six month Summer Engineering Bridge Program offered at Camosun College, students with a two year diploma in Welding Engineering Technology will be admitted to the third year of the Bachelor of Engineering in Mechanical Engineering (January) program. This degree is eligible for P.Eng. designation. See Camosun College. Updated April 23, 2010 SPECIFIC RECOGNITION.
Transfer options may also be available at other post-secondary institutions where credits from SAIT programs could be evaluated on an individual basis. Interested students should contact the post-secondary institute of their choice for more information and possible options there.
